ELT Tester Mini Wi-Fi

ELT Tester Mini Wi-Fi allows to perform easy testing of distress beacons, such as ELT.

Turn on the tester and take your phone, tablet or PC, perform the Wi-Fi connection between PC and tester and run the test mode. Switch the beacon to TEST mode.

The tester will receive the signal, measure the frequency meanings, power levels in 121.5MHz, 243MHz, 406MHz channels, signal duration and finally decode all Cospas-Sarsat message content automatically including position data if available. Everything will be displayed immediately on your mobile phone screen.

The tester provides demodulation and decoding of the emergency information and displays on your choice the НЕХ-code (15 Hex ID or the message 1-112 bit) as well as all decoded information in text view with all measured parameters.

All data will be saved in memory for further processing. Test reports will be created automatically.

The tester is lightweight, hand-held and user-friendly in usage.

The tester can be used for testing of any COSPAS-SARSAT distress beacons such as ELT, PLB or marine EPIRBs.

Features of 406MHz ELT Tester

• All 406 MHz aircraft protocols will be decoded
• Meets FAA, CAR and EuroCAE ELT inspections requirements
• Internal database of received messages with possibility to save results and generate the test reports.
• Easy connection to PC, laptop, notebook, mobile phone or tablet to process the stored data. Wi-Fi and any browser is required.
• Long life batteries, easy raplace
• External RF attenuator in standard delivery set
• Easy recalibration without returning back to factory
• 1 year warranty

The ELT Tester Mini w/ Wi-Fi allows to perform:

• reception, demodulation and decoding of the emergency information transmitted on channel 406 MHz;
• position data encoding(if available) in degree’s, minutes, seconds;
• frequency measurement of 406MHz signal with accuracy ± 500Hz;
• frequency measurement of 121,5 MHz signal with accuracy ± 300Hz;
• frequency measurement of 243 MHz signal with accuracy ± 300Hz;
• level measurement on 406 MHz channel in range 19…43dBm with accuracy ±0.5dB (-34…-10dBm ±2dB  by means of antenna);
• level measurement on 121.5 MHz channel in range 13…20dBm with accuracy ±0.5dB (-40…-34dBm ±2dB  by means of antenna);
• level measurement on 243 MHz channel in range 13…20dBm with accuracy ±0.5dB (-40…-34dBm ±2dB  by means of antenna);
• estimation of the positive/negative phase deviation of modulated signal with accuracy to  ± 2,8о;
• measurement of total transmission time of 406 MHz signal with accuracy ± 0,2%;
• measurement of  unmodulated carrier duration of 406 MHz signal with accuracy ± 0,2%;
• estimation of the equivalent radiated power of 406 MHz signal through broadcast.

The tester power supply is performed by internal rechargeable power supply unit.

Approximate continuous operation time of the tester from the internal power supply elements is about 6 hours.