Elt Tester Mini w/ Wi-Fi

ELT Tester mini operation

Operation / Features

ELT Tester Mini w/ Wi-Fi allows to perform easy testing of distress beacons, such as ELT.

The procedure is as follows:

Turn on the tester and take your phone, tablet or PC, perform the Wi-Fi connection between PC and tester and run the test mode. Switch the beacon to TEST mode.

The tester will receive the signal, measure the frequency meanings, power levels in 121.5MHz, 243MHz, 406MHz channels, signal duration and finally decode all Cospas-Sarsat message content automatically including position data if available. Everything will be displayed immediately on your mobile phone screen.

The tester provides demodulation and decoding of the emergency information and displays on your choice the НЕХ-code (15 Hex ID or the message 1-112 bit) as well as all decoded information in text view with all measured parameters.

All data will be saved in memory for further processing. Test reports will be created automatically.

The tester is lightweight, hand-held and user-friendly in usage.

The tester can be used for testing of any COSPAS-SARSAT distress beacons such as ELT, PLB or marine EPIRBs.

Features of 406MHz ELT Tester

  • All 406 MHz aircraft protocols will be decoded
  • Meets FAA, CAR and EuroCAE ELT inspections requirements
  • Internal database of received messages with possibility to save results and generate the test reports.
  • Easy connection to PC, laptop, notebook, mobile phone or tablet to process the stored data. Wi-Fi and any browser is required.
  • Long life batteries, easy raplace
  • External RF attenuator in standard delivery set
  • Easy recalibration without returning back to factory
  • 1 year warranty
 

Products

406 MHz ELT Tester (Test Set)

406 MHz / 243 MHz / 121.5 MHz ELT TESTER is designed to check the avionics emergency locator transmitters (ELT) operating via COSPAS-SARSAT system. It provides accurate testing in volume of annual or maintenance requirements or fast check after ELT's encoding or installation in accordance with USA (FAA Part 91.207), Canada (CAR 571 Appendix G), Europe (CAA/EuroCAE) requirements.

BT-611M Beacon Tester

BT-611M Beacon Tester is designed for high accuracy and resolution measurements of the full set of beacon signal parameters to check its compliance with the ones, specified in C/S doc. T.001, T.007. The tester is succesfully used for Cospas-Sarsat type approval certification process. It is professional specified test equipment for beacon manufacturers or test laboratories, service centers.

Beacon Simulator BG-105

Beacon Simulator BG-105 is high-precision simulator of Cospas-Sarsat emergency beacon messages. BG-105 allows to simulate up to five simultaneously operating beacons with messages overlay in time. The generator is intended to operate under PC control to provide the customization of main parameters of each simulated beacon on every of five channels by means of terminal program.

Airborne AIS Test Set

Airborne AIS Test Set provide reliable testing of Airborne/Aircraft Automatic Identification System operation. The AIS Test Set is intended for verification of marine and avionics AIS installations. The AIS Tester is specified equipment for radio surveyors, classification societies and administrative authorities. AIS Tester allows to test all type of AIS transponders of any manufacturer.

Sarsat Beacon Monitoring System

Cospas-Sarsat Distress Signal Homer Receiver is specially designed for 406MHz emergency radio beacon signals detection, reception, verifying, decoding and positioning. It is a wide range ground/mobile real-time COSPAS-SARSAT signal decoder designed to locate and verify emergency distress signals sent by any 406MHz ELT in local search area.

Aircraft Radio Test Set

The Aircraft Radio Test Set enables functional and verification testing of MF/HF/VHF airborne radio equipment, emergency locator transmitters as well as airborne AIS stations. Aircraft Radio Test Set is be used to diagnose faulty radio communications equipment while installed in the aircraft. Set fulfills the specific requirements for maintenance, repair and device verification after production.

AIS (AIS-SART) Tester Pro Lab

AIS (AIS-SART) Tester Pro Lab is designed for laboratories and manufactures of AIS and AIS-SARTs. The AIS Test Set is intended for verification AIS and AIS-SART parameters in real time with saving all received data. AIS Tester Pro Lab is extended version of AIS Tester M1, have the same features but allows to perform deep analysis of AIS and AIS-SART functions in real time.