Beacon Simulator BG-105

BG-105 Operation. BG-105 Simulates Sarsat beacons

Operation / Features

The BG-105 Beacon Simulator has the following operation capabilities:

-Generate Beacon Test Sequences pursuant to Cospas-Sarsat commissioning standards.

- Simulate a large number of beacons for system capacity tests.

-Vary the radio frequency and data content parameters associated with each beacon transmission to test the capability of the system and to detect and process beacons with different parameters.

-Add interfering carriers or white noise to the beacon transmissions to test the system for impacts of detection and processing from external in band interference.

-A self verification capability consisting of the processing capability of a GEOLUT. This allows the verification that the transmitted signals are correct.

-Simulate collisions between beacons; that is, beacons that overlap in time, in frequency or both to determine how the system reacts to overlapping beacons.

 

Products

406 MHz ELT Tester (Test Set)

406 MHz / 243 MHz / 121.5 MHz ELT TESTER is designed to check the avionics emergency locator transmitters (ELT) operating via COSPAS-SARSAT system. It provides accurate testing in volume of annual or maintenance requirements or fast check after ELT's encoding or installation in accordance with USA (FAA Part 91.207), Canada (CAR 571 Appendix G), Europe (CAA/EuroCAE) requirements.

ELT Tester Mini w/ Wi-Fi

ELT Tester Mini w/ W-Fi is third generation device designed to check the avionics emergency locator transmitters (ELT) operating via COSPAS-SARSAT system. Tester is operating with any mobile phone or desktop PC by means of Wi-Fi connection. It is small and light-weight. The ELT tester provides demodulation and complete decoding of Cospas-Sarsat messages. Test results will be displayed in your mobile phone, tablet or PC. All tests will be stored in internal memory for future use.

BT-611M Beacon Tester

BT-611M Beacon Tester is designed for high accuracy and resolution measurements of the full set of beacon signal parameters to check its compliance with the ones, specified in C/S doc. T.001, T.007. The tester is succesfully used for Cospas-Sarsat type approval certification process. It is professional specified test equipment for beacon manufacturers or test laboratories, service centers.

Airborne AIS Test Set

Airborne AIS Test Set provide reliable testing of Airborne/Aircraft Automatic Identification System operation. The AIS Test Set is intended for verification of marine and avionics AIS installations. The AIS Tester is specified equipment for radio surveyors, classification societies and administrative authorities. AIS Tester allows to test all type of AIS transponders of any manufacturer.

Sarsat Beacon Monitoring System

Cospas-Sarsat Distress Signal Homer Receiver is specially designed for 406MHz emergency radio beacon signals detection, reception, verifying, decoding and positioning. It is a wide range ground/mobile real-time COSPAS-SARSAT signal decoder designed to locate and verify emergency distress signals sent by any 406MHz ELT in local search area.

Aircraft Radio Test Set

The Aircraft Radio Test Set enables functional and verification testing of MF/HF/VHF airborne radio equipment, emergency locator transmitters as well as airborne AIS stations. Aircraft Radio Test Set is be used to diagnose faulty radio communications equipment while installed in the aircraft. Set fulfills the specific requirements for maintenance, repair and device verification after production.

AIS (AIS-SART) Tester Pro Lab

AIS (AIS-SART) Tester Pro Lab is designed for laboratories and manufactures of AIS and AIS-SARTs. The AIS Test Set is intended for verification AIS and AIS-SART parameters in real time with saving all received data. AIS Tester Pro Lab is extended version of AIS Tester M1, have the same features but allows to perform deep analysis of AIS and AIS-SART functions in real time.